Wiseup U9 Guia Del Usuario página 4

automatically.
(2) Press the Motion Detection Button once; the camera will vibrate 3 times while
both blue and red indicator lights will flash 4 times and then turn off, indicating
the camera has entered into motion detection mode.
(3) Press the Motion Detection Button once again to stop motion detection
mode. The camera will vibrate once while the blue and red indicator light will
flash once.Then the blue indicator light will turn off while the red indicator light
will be solid on, indicating the camera is back to standby mode.
[Notes]:
The video file length may vary, depending on whether a movement is detected or not.
6). VIDEO/PHOTO FILE UPLOADS
OPTION 1
(1)Insert the camera into a proper PC computer USB port when it is turned off.
(2)The camera will be recognized as a removable disk drive.
(3)All the files can be accessed in the DCIM folder.
OPTION 2
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Insert the card reader into a proper PC computer USB port.
(3) The Micro SD card will be recognized as a removable disk drive.
(4) All the files can be accessed in the DCIM folder.
7). SET THE DATE/TIME STAMP
OPTION 1
(1) Insert the camera into a proper PC computer USB port when it is turned off.
(2) Removable disk drive folder appears.
(3) Click on the drive in the root directory and inside the root directory, find a
TAG.TXT file. (If there is no such file, create one)
(4)Input the current date and time in the txt file with the correct format:
Year-Month-Day Hour: Minute: Second. (For example: 2016-03-12 17:04:59).
Save this file.