Parts & Assembly - Nostalgia Products RFF500 Instrucciones Y Recetas

PARTS & ASSEMBLY
Your 50s STYLE CHOCOLATE FONDUE FOUNTAIN requires little
assembly. Prior to use, wipe out Bowl with a damp cloth and dry.
Wash Auger and Tower in warm soapy water, rinse, then dry.
After cleaning, return Auger to Base. Make sure Auger is securely in place by
aligning the opening on the bottom of the Auger with the Base Pin. Do not
attempt to place Auger or Tower on Base or remove from Base while the motor
is running. Make sure the Tower is fitted on the posts in the Base properly.
Bowl
Base
SWITCH POSITIONS
Left: FLOW | Right: HEAT | Center: OFF
5
Tower
Auger