Laser 6167 Instrucciones página 3

Using The Torque Wrench
• For first time use, or after a long period without use, adjust wrench up and down a few
times to distribute lubricant throughout the mechanism.
• Tighten in a slow and controlled manner and stop applying pressure immediately the
required setting has been reached. Tightening too quickly will result in an inaccurate
final torque figure.
• Take care to stop applying further torque once the desired setting has been reached.
Over-torqueing can damage the wrench.
• When finished using the instrument, wind back the adjustment ferrule until the legend
STOP appears in the in the adjustment indicator sight window (refer to Figure 1). Take
care not to turn the adjuster lower than the STOP setting or the mechanism may be
damaged.
• Never use the torque wrench to tighten a fastener to a higher torque than the maximum
torque setting.
• Take care of the torque wrench and keep it clean; do not store in areas of high
temperature or humidity.
Our products are designed to be used correctly and with care for the purpose for which they are
intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and
the Tool Connection cannot be held responsible for any damage to personnel, property or equipment
when using the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed
to offer general guidance for a particular tool's use and while all attention is given to the accuracy
of the data no project should be attempted without referring first to the manufacturer's technical
documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter specifications
and components without prior notice. It is the responsibility of the user to ensure the suitability of the
tools and information prior to their use.
Guarantee
If this product fails through faulty materials or workmanship, contact our
service department direct on: +44 (0) 1926 818186. Normal wear and tear are
excluded as are consumable items and abuse.
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk www.toolconnection.co.uk
www.lasertools.co.uk
Torque Wrench Set
Instructions
www.lasertools.co.uk
6167