Continuous Measurement - Hammerhead HLMT130 Manual Del Usuario

OPERATION

6. CONTINUOUS MEASUREMENT

The continuous measurement function can be used for transferring measurements,
e.g., from construction plans. In the continuous measurement mode, the compact
laser measuring tool can be moved relative to the target. For example, in the
continuous measurement mode, the user can target a wall or other object and as
the user moves toward or away from the object, the changing distance to the target
is continuously updated on the display.
a. Press the mode button
measurement indicator
b. Press the measure button
will blink.
c. Press the measure button
activated and the tool sounds.
d. Move the tool until the required distance value is indicated at the bottom of the
display.
e. The continuous measurement will continue to measure for about 3
minutes, and the measurement will automatically stop after 3 minutes.
6
NOTE: Press any button to stop the continuous measurement during the 3
minutes.
14
to move the cursor to the continuous
.
to turn on the laser beam; the laser indicator
again to take measurement, the beeper is
COMPACT LASER MEASURING TOOL