Metra 99-5832G Instrucciones De Instalación

KIT COMPONENTS
A) Radio trim panel • B) Dash panel • C) Radio brackets • D) Pocket • E) Airbag light blank
• F) (4) #8 x 3/8" Phillips truss head screws • G) (2) #8 x 3/8" Phillips pan head screws • H) (3) Metal "U" panel clips • I) (5) Metal "D" panel clips •
J) (4) Small metal "D" panel clips • K) (4) Plastic panel clips
A B
F
Metra. The World's Best Kits.
®
Ford Transit
*(without 4.2" screen)
Visit MetraOnline.com
vehicle specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Radio trim panel is painted gray
C
H
G I
MetraOnline.com
2015-2019*
for more detailed information about the product and up-to-date
D E
J
K
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
99-5832G
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly
-ISO DIN radio provision with pocket ..................3
-ISO DDIN radio provision .....................................3
Final Assembly .......................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-5524
Antenna adapter: • 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx screwdriver
Attention: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product.
Ensure that all installation connections are
secure before cycling the ignition to test
this product.
REV. 06/28/21 INST99-5832G