Descargar Imprimir esta página
Ocultar thumbs Ver también para 99-5831:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) Panel clips • E) (4) #8 x 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Ford Transit Connect
2014-2018
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Passenger airbag indicator
• Painted black (99-5831B), or charcoal gray with black (99-5831G)
C
D
MetraOnline.com
(with factory 4.2" display)
E
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-5831
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: XSVI-5524-NAV or AX-ADBOX2
& AX-ADFD02
Antenna Adapter: 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-15 Torx driver • T-20 Torx driver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 2/26/19 INST99-5831

Publicidad

loading

Resumen de contenidos para Metra 99-5831

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/26/19 INST99-5831...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Remove the top panel above the display. 4. Remove the A/C vents and hazard switch (Figure A) from the panel and set aside for kit assembly. 2. Remove (2) T-15 Torx screws above the 5. Remove (2) T-20 Torx screws from the display/radio panel.
  • Página 3: Kit Assembly

    Metra recommends using the proper reverse order of disassembly, using the mating adapter from Metra and/or AXXESS . 99-5831 radio trim panel. 8. Attach (4) panel clips to the radio trim (Figure B)
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/26/19 INST99-5831...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 2/27/19 INST99-5831...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Quite el panel superior de arriba de la 4. Quite las rejillas de aire acondicionado y pantalla. (Figura A) el interruptor de las luces intermitentes del panel y guárdelos para el ensamble 2. Quite los (2) tornillos Torx T-15 de arriba del kit.
  • Página 7: Ensamble Del Kit

    99-5831. panel de la moldura del radio 99-5831. REV. 2/27/2019 INST99-5831...
  • Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y ®...