Mr Handsfree Blue Perfection Manual Del Usuario página 14

PAIRING, CONNECTION AND DISCONNECTION
A. PAIRING
• For pairing mr Handsfree Blue Perfection with your Bluetooth
menu Bluetooth
corresponding message appears on the display and a confirmation tone will be heard.
• Activate the Bluetooth
• Search for available Bluetooth
®
all Bluetooth devices within 10 m distance and display them as a list.
• Select " BLUE PERFECTION " from the list.
• Enter the passkey "0000". " PAIRING OK " will appear on the display and the device will turn to Standby mode.
"Blue Perfection" will be stored in the list of paired devices in your phone.
Note:
If necessary, the pairing mode could be activated by pressing the left button on the screen unit. The button
should be pressed and held for more than 5 sec.
B. CONNECTION
In some cases the device could be disconnected from your phone. For example, if the Blue Perfection was switched off.
To restore the connection between the Blue Perfection and your phone:
• Switch on the power and the connection will be restored automatically; OR
• Use the joystick to go to Main menu
• Press and hold the left button on the screen unit for more than 5 sec.
C. DISCONNECTION
Sometimes you need to disconnect your phone from the Blue Perfection. For example, if the phone should communicate
®
with another Bluetooth
...........................................................................................................................................................................
®
Pairing and press
® function in your mobile phone.
®
devices by entering the corresponding submenu of the phone. Your phone will find
Bluetooth
device.
® mobile phone, use the remote control to go to Main
. Now mr Handsfree Blue Perfection is in registration mode. The
®
Connection. " CONNECTION... " will appear on the display; OR
GB - 12