Voice Dialing; Dialing From The Phonebook - Mr Handsfree Blue Perfection Manual Del Usuario

MAKING CALLS
1. STAND-BY MODE
In Stand-by mode the display shows the current parameters of your phone:
1. Signal strength of the cellular network at the current location. The higher the bars, the stronger the signal. The
number of bar-segments may differ slightly from your phone due to Bluetooth
2. Capacity of the battery. The higher the capacity, the more bars. If the battery is almost discharged, the icon will
flash. If the phone is in charging mode, the charger icon will appear near the battery icon.
®
3. The Bluetooth name of the connected mobile phone.
®
4. If the Bluetooth connection is activated, there will be a "Car" icon on the display.

2. VOICE DIALING

Before using this function, make sure that you have saved voice tags for voice dialing in your phone.
• To activate voice dialing, press
• Press .
• The below picture will appear on the display.
• After the beep, say the tag.
• The Blue Perfection will record the corresponding tag from its memory and dial the number.

3. DIALING FROM THE PHONEBOOK

You can dial a number from the phonebook stored in the Blue Perfection memory.
• In Stand-by mode, press
• Press .
• The below picture will appear on the display.
...............................................................................................................................................................................
and select the item " VOICE CALL "
to enter the Menu and select the item " PHONEBOOK "
GB - 19
®
implementation for this software.
in the menu.
.