Care And Maintenance; Corrective Action - Style selections RBETA4867-92 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
19. Insert small blocks (not included) between the
rear panel braces and the back panel braces.
These will apply pressure to the back panel to
hold it in place. Remove the braces after 24
hours.

CARE AND MAINTENANCE

Wipe the surface with a damp cloth or sponge. For basic stains, clean with mild detergent or general
purpose cleaner. For cleaning corners and seams, spray with mildew cleaner. With regular
maintenance spraying there should be no need to scrub any silicone caulk joints.
TROUBLESHOOTING
PROBLEM
Panels not sticking
to wall.
Panels not fitting
properly.
POSSIBLE CAUSE
1. Surfaces not properly prepared for
silicone adhesive/sealant.
2. Wall surface not flat for proper
adhesion.
1. Existing wall surfaces out of plumb.
2. Improper trimming of wall panels.
3. Panel cut too small (less than 1/2 in.).
19

CORRECTIVE ACTION

1. Clean surface thoroughly and
reapply adhesive.
2. Use wood bracing support to
form panel to wall surface.
1. Scribe panels to fit.
2. Reorder miscut panel.
3. Order optional cove molding
10
Lowes.com