King of Fans HV-20G Manual Del Propietário página 3

ASSEMBLY INSTRUCTIONS
1. Please put the fan body on a flat and stable surface
as shown in the picture.
2. Remove the two screws from the steel tube
attached to the fan head, save them for step 4.
3. Align the hole in the stand with the hole in the
steel tube attached to the fan head.
4. Loosen the adjustment knobs at the side of
the fan body just slightly to make the
attached steel tube pivot, carefully Insert
the ends of the stand into the counterparts
and align the holes.
5. Carefully insert the screws from step 2 into
the holes and tighten. Please be sure to
re-tighten the adjustment knobs loosened in
step 3 to avoid swaying of the fan head.