Berner 185244 Manual Del Usuario página 10

GB Instructions for use
This Berner Car Tester is only to be used within specified volt-
age range and not domestic mains supply. Voltage range
6 - 48 Volt/ IP 40.
The Responsible body or operator should refer to the
instruction manual to preserve the protection afford by the
equipment. If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the equip-
ment may be impaired.
Any parts of the device and its accessories are not allowed to
be changed or replaced, other than authorized by the manu-
facturer of his agent.
WARNING: Not to use the equipment for measurements on
mains circuits, not to use the equipment for measurements on
voltage exceed the voltage range describe in the manual.
WARNING: Not to use the product for measurements within
other measurement categories, such as CAT II, CAT III,
CAT IV.
1.) Only hold the handle, do not touch crocodile clip
when testing.
2.) Voltage testing
Attach crocodile clamp to earth (bare metal on the car) (earth
is always negative).
Attach test probe of Berner Car Tester to supply e.g. fuse,
battery, test terminal, etc. The LED (+) lights up when voltage
is present.
9