Declaration Of Conformity; Fields Of Application - Berner 185244 Manual Del Usuario

3.) Battery testing
Crocodile clamp on negative pole of the battery, test probe of
Berner Car Tester on positive pole. The LED (+) lights up when
voltage is present.
4.) Hedlight / rearlight test
Attach crocodile clamp to earth and test probe to lamp socket.
5.) Testing leads
Attach crocodile clamp to earth. Pull back pin by means of
push mechanism, clamp the car lead into wedge and pierce
with pin, the LED (+) lights up when voltage is present.
After voltage test minute hole in lead closes again.
6.) Lead test positive / negative
Pierce car lead, attach crocodile clamp to positive or negative
pole of battery.
The LED (+) lights up when placed on a negative pole, thus
showing that a positive lead is present. The reverse being the
case for a negative lead.

Declaration of conformity

This product is in conformity with standards of low voltage in
accordance with the regulations 2006/95/EC, 2004/108/EC

Fields of application

The tool is intended for use in applications as described in the
operating instructions only.
Any other form of usage is not permitted and can lead to acci-
dents or destruction of the device. Any misuse will result in the
expiry of all guarantee and warranty claims on the part of the
operator against the manufacturer.
10