C/D
E
M8 x 30 mm Wood Dowel
(8 used in this step)
15 mm Washer Head
(8 used in this step)
11. Attach two Base Side Stretchers (E) between the Front and Back Stretchers (C and D) with eight Wood
Dowels (5).
12. Using the pilot holes as a guide, attach four Corner Connectors (11) to the Base Side Stretchers (E) at
the inner joints with the provided Washer Head Screws (6). Proceed to fasten the Corner Connetors (11)
to Base Front and Back Stretchers (C and D) with the Washer Head Screws (6).
Assembly Instructions
5
E
C
⑤
Screw
⑥
D
11
6
C
E
12
E
Corner Connector
(4 used in this step)
D
⑪
E