Better Homes and Gardens BH46-084-899-02 Manual Del Usuario página 6

7
4
M6 x 30 mm Wood Dowel
(4 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Insert four M6 x 30 mm Wood Dowels (4) into the inner holes of the Drawer Back Panel (N). Tap it in
with a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all
dowels.
3. Fasten the Drawer Back Panel (N) to the Drawer Side Panels (O and P) with four 38 mm Screws (7).
Drawer Assembling
P
④
N
M4 x 38 mm Screw
(4 used in this step)
6
4
⑦
O
7