Taurus AF1300D Manual Del Usuario página 8

- TEMPERATURE AND TIME
- You can change the time and temperature by
using the up and down arrows.
- Press the TIME/TEMP button to switch bet-
ween temperature/time
- PRE-SET PROGRAMS
- This appliance has 8 pre-set programs
- To select the program, press the menu button
- you can move from one program to the next
by pressing this button.
- If you wish, you can also change the tem-
perature and time settings for the pre-set
programs.
- Once the program has been selected, press
the start button to start heating. You will see
that the operation indicator light will light up
orange.
- To change any settings while cooking, first
pause, modify and then resume.
- To start heating, press the button
- NOTE: During the cooking phase, you can
press the pause button
pliance, the timer will also stop and display
whatever time remains. Press this button again
to resume the cooking phase.
- The fryer will beep when the cooking time has
finished.
- Check to see that the food is cooked.
- If it is not, you only have to put the container
back in the fryer and program the timer to cook
for a few more minutes.
- Once cooking has finished, take the whole pan
part out of the appliance. The appliance will
switch itself off automatically.
- CAUTION: both the pan and the basket, as
well as the food, will be VERY hot.
- Place the basket on a surface that will with-
stand high temperatures.
- Separate the basket from the pan by using the
basket release button and then tip the food out
without any risk of burning yourself (Figure 1)
- Note: It is not necessary to wait to reuse the air
fryer directly after cooking certain foods.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Unplug the appliance from the mains.
- Clean the appliance
to stop the ap-
SAFETY THERMAL PROTECTOR
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, unplug it from the mains
supply and wait approximately 15 minutes
before reconnecting it. If it fails to switch on
again, take it to one of the authorised technical
assistance services.
CLEANING
- Unplug the appliance from the mains and let it
cool before performing any cleaning task.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not immerse the appliance in water or any
other liquid, or place it under a running tap.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not kept clean, its surface
may deteriorate, which will inevitably shorten
the appliance's useful life, as well as making it
unsafe to use.
- None of the parts on this appliance are suitable
for the dishwasher
- Next, dry all the parts before fitting them toge-
ther and storing.
TABLE OF
RECOMMENDATIONS
- The table below contains common settings that
may be of use to you.
- Note: these settings are merely indicative.
Foodstuffs can vary in origin, size, shape and
brand, so we cannot guarantee the best set-
tings for any specific food.