How To Use; Alarm Set - Steren CLK-220 Manual De Instrucciones

INSTALLATION
Before start using the clock radio, make sure to install a 9V battery. It will helps you to
keep the power in the clock radio even after an outage.
Then, connect the power cord into an available outlet.

HOW TO USE

TIME SET
1.- Press and hold TIME button, then press HOUR button until you reach the current
hour. Drop both buttons.
2.- Press and hold TIME button, then press MINUTE button until you reach the current
minutes. Drop both buttons.

ALARM SET

1.- Press and hold ALM button, then press HOUR until you reach the desired starting
hour. Drop both buttons.
2.- Press and hold ALM button, then press MINUTES until you reach the desired
starting minutes. Drop both buttons.
3.- Move the AUTO / OFF / ON switch to AUTO to enable the alarm.
4.- Select between alarm tone or radio for the alarm, use the Buzzer / Volume button.
5.- When the alarm starts, press Snooze to silent it for 9 minutes, after that time the
alarm will buzz once again.
6.- Move the AUTO / OFF / ON switch to OFF to turn the alarm off.
Remember, if you place the switch to OFF, the alarm will be deactivated for next
day.
6