Safety Information - Blue Hawk SGY-NR-KITV Manual De Instrucciones

SAFETY INFORMATION

Read this manual and all operating instructions thoroughly before loading or unloading fasteners
or any other use of the tool. Failure to follow safety or operating instructions could result in
serious personal injury.
Keep chi ldren away. Children must never be allowed in the work area. Do not let them handle
brad nailer nails, fasteners, air hoses or any other equipment or tool.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically nonconductive clothes and nonskid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
Protect your eyes. Wear safety glasses or a face shield when using this product.
Protect your hearing. Noise can harm your hearing. Always wear ear protection to safeguard your
hearing.
Keep proper footing at all times. Do not overreach as slipping, tripping, and/or falling can be a
major cause of serious injury and/or death. Be aware of excess hose left in the working area or
work surface. Do not abuse hoses or connectors. Never carry the tool by the hose or yank it to
disconnect it from power supply. Keep hoses away from heat, oil, and sharp edges. Check hoses
for weak or worn connections before each use and make certain that all connections are secure.
NEVER USE OXYGEN, COMBUSTIBLES OR ANY OTHER BOTTLED GAS AS A POWER
SOURCE, as they can cause explosions and serious personal injury.
DO NOT CONNECT TOOL TO COMPRESSED AIR THAT EXCEEDS 120 PSI.
Always be aware of air hose tripping hazard for anyone in the work area, especially if a long air
hose is used in work area.
Carry tool by the handle only.
To avoid unintentional firing of tool, always be aware when safety part of trigger is depressed.
Always keep the tool pointed away from yourself and others.
r
Keep hands and body away from rear area of gun to safely guard against possible injury.
a
Always disconnect tool from air supply before loading fasteners to prevent any accidental firings
during connection.
A
Do not keep the trigger depressed during loading of fasteners.
Unintentional firing of fasteners may cause personal injury.
Disconnect tool from air supply hose and close the compressor before performing any
maintenance.
Do not drive fastener on scaffolding, ladders, and similar construction materials for which it's not
intended.
Never use a tool that is leaking air, has missing or damaged parts or requires repair.
Make sure all screws are securely tightened before use.
Only use parts and accessories recommended by the manufacturer.
5
www.lowes.com
R