Vertical Mounting Instructions - Chauvet Professional EPIX STRIP IP 50 Guía De Referencia Rápida

EN

Vertical Mounting Instructions

1. Attach the clamp to the mounting bracket.
2. Attach the clamp to the desired structure or surface.
3. Attach a safety cable to the product's safety loop.
Never attach more than 6 products together when hanging vertically from a single mounting point.
5
QUICK REFERENCE GUIDE
Attach the Safety Cable
of the first product to
the mounting point
Attach the Safety Cable of the
following products to the
Bracket of the preceding product
EPIX Strip IP 50 QRG Rev. 2