Publicidad
Idiomas disponibles
Idiomas disponibles
GearLoft™ Shelf Use Requirements
Intended to be installed on Gladiator
panels or GearTrack
®
channels.
Maximum weight limit is 100 lbs (45.5 kg).
Unpack the GearLoft™ Shelf Parts
Remove the shelf parts and fasteners, and dispose of/recycle all
packaging materials.
Assemble GearLoft™ Shelf
F1
⁵⁄₁₆
F1
" Allen-head bolt (4)
⁵⁄₁₆
F2
" Flange nut (4)
Gather the required tools before starting assembly.
Tools Needed:
¹⁄₂" Wrench
Tools Supplied:
Allen wrench
IMPORTANT: Determine whether you will be mounting the shelf to
the wall with the braces above or below the shelf.
INSTALLATION INSTRUCTIONS
®
Garageworks GearWall
F2
F11
¹
F11
Wing nut (4)
Mounting Braces Above Shelf
®
1. With the braces pointing upward, align the braces with the center
and back holes on each side of the shelf.
2. Using Allen-head bolts (F1) and flange nuts (F2), attach a brace
to each side of the shelf. Fully tighten the bolts.
Mounting Braces Below Shelf
1. With the braces pointing downward, align the braces with the
center and back holes on each side of the shelf.
2. Using Allen-head bolts (F1) and flange nuts (F2), attach a brace
to each side of the shelf. Fully tighten the bolts.
A
A. Brace attached to shelf
A
A. Brace attached to shelf
Publicidad
