Nevir NVR-VT29BM Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Switch the fan off before moving or cleaning.
5. The fan should be set up on a stable and level surface to avoid it being
Knocked over.
6. Do not expose the fan to excessive heat or humidity, as this can cause
damage to the continuous steam of cold air.
7. Do not immerse in any form of liquid.
8. It is not advisable to expose people, in particular babies and the elderly, to a
continuous stream of cold air.
9. The fan should be kept out of reach of children.
10. Ensure that the cable does not get caught beneath and device, in drawers,
behind shelves etc.
11. Do not run the cable under carpets, rugs, etc.
12. Ensure the cable is kept away from busy areas to avoid anyone tripping
over it.
13. Do not use if the device or cable become damaged. Take it to a specialist
for repair.
14. For indoors use only.
INTRODUCTION
1. Speed
2. Timer setting
3. Swing
4. Sleep
ASSEMBLY
Assemble the base around the cord and align with the posts on the bottom of the fan. It will
1.
drop into position when correctly aligned.
IMPORTANT – The plug will not fit through the hole in the base.
2.
Using the screws provided secure the two base halves together (2 screws), and then secure
the base to the fan unit (4 screws)
3.
Use the provided cable grip and screws to fix the cable in position to prevent it becoming
trapped under the base.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido