Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
1.
Connect the power plug to a suitable outlet.
Turn the fan on using the ON/OFF button.
2.
3.
Select the desired speed pressing the Speed button until the desired speed LED is lit.
4.
Turn swing on or off by pressing the SWING button.
5.
Pressing the mode button will select either NATURAL or SLEEP.
Remote Control:
The remote control can be used to adjust all these features remotely by pressing the
corresponding buttons on the remote.
Please note: Remote requires 2xAAA batteries
MAINTENANCE
1.
Before cleaning turn the fan off and unplug from the power supply.
To clean the fan use a soft cloth to wipe off any dust. If the fan is very dirty use a damp
2.
cloth and wipe dry. Do not use any cleaning detergents, sprays or other chemicals, as
they will damage the fan.
3.
Store the fan in the original packing in a ventilated dry area.
4.
The motor bearings are permanently sealed and do not require additional lubrication.
7
Publicidad
Tabla de contenido
