Technical Data; Measuring Conditions - PCE Stanley TLM 210 Manual De Empleo

Technical Data

Range (use target plate
for longer distances)
Measuring accuracy up
to 30 m (2 σ standard
deviation)
Smallest unit displayed
Laser class
Laser type
Ø laser spot
(at distance)
Automatic switch off
Illumination
Minimum, maximum
measuring
Addition, Subtraction
(+/-)
Historical storage
Battery life,
Type AAA, 2 x 1.5 V
IP rating
Dimension and weight
Temperature range:
Storage
Operating
* maximum deviation occurs under unfavourable conditions
such as bright sunlight or when measuring to poorly
reflecting or very rough surfaces. For distances over 30 m -
Stanley TLM 210 1.0.0 gb
0.05 m to 100 m
0.2 ft to 328 ft
typ.: ± 3 mm*
1 mm
II
635 nm, < 1 mW
6 / 30 / 60 mm
(10 / 50 / 100 m)
after 180 s
(19)
up to 5 000
measurements
IP 54 acc. IEC529
splash proof, dust proof
135x55x34 mm, ~150 g
-25°C to +70°C
(-13°F to +158°F)
-10°C to +50°C
(-14°F to +122°F)
5
without using a target plate - the maximum deviation may
increase by ± 0.1 mm/m to a maximum of ± 10 mm

Measuring Conditions

Measuring Range
At night, at dusk and when the target is shadowed
the measuring range without target plate is
increased.
Use a target plate to increase the measurement
range during daylight or if the target has a bad reflec-
tion.
Measuring Surfaces
Measuring errors can occur when measuring toward
colourless liquids (e.g. water) or dust free glass,
styrofoam or similar semi-permeable surfaces.
Aiming at high gloss surfaces deflects the laser beam
and measurement errors can occur.
Against non-reflective and dark surfaces the
measuring time can be increased.
Care
Do not immerse the unit in water. Wipe off dirt with
a damp, soft cloth. Do not use aggressive cleaning
agents or solutions. Treat the optical surfaces with
the same care that you would apply to eyeglasses
and cameras.
Range
From about 70 m, use target plate.
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
Appendix
GR