Horizon Global 24964 Instrucciones De Instalación página 4

1. Remove Plastic Cover- (Driver Side) using a 10mm socket remove (4)
nuts and using a flathead screwdriver remove (3) plastic push pins.
Nuts
Push Pins
2. (B) Then remove the plastic fascia attachment with a phillips-head
screwdriver (1) screw per attachment and return to owner. (see
figure 4)
©2017 Horizon Global™ Corp. - Printed in Mexico
2. (A)Remove Lower Fascia- using a phillips-head screwdriver remove(2)
screws (1) per side and using a flathead screwdriver remove (3) plastic
push pins. Then remove the plastic fascia attachment with a phillips-head
screwdriver (1) screw per attachment and return to owner.
3. Lower Exhaust – using a exhaust hanger removal tool remove the
rubber isolators from the hanger. NOTE: Support the exhaust before
lowering.
Sheet 4 of 18 24964NP
Screws
Push Pins
07-24-17 Rev. A