Mounting Bracket - Stanley DR-1652A Guia De Inicio Rapido

Mounting Bracket

Your Stanley Desk Hub USB includes a mounting bracket that
allows you to mount the DeskHub USB under a table, desk, or
secure it in place at the top of your workspace. The mounting
bracket can either be mounted with the provided double sided
tape or mounting screws.
With the cord facing upwards (Match the shape of the deskhub
with the mounting bracket) simply align the notched mounting
pegs into the holes on the back of the deskhub. To lock into
place, slide the mounting plate down. To remove the hub from
the mounting bracket once it has already been installed, slide the
hub in the opposite direction and the hub will unlock from the
mounting plate.
Tip: If using the mounting screws, use the mounting plate as a
template to mark and pre-drill the holes required for installation.
pegs
pinzas
goupilles
pegs
pinzas
goupilles
BRACKET / SOPORTE / SUPPORT
screws
tornillos
vis