Publicidad
Mounting Bracket
Your Stanley Power Hub includes a mounting bracket that allows
you to mount the Power Hub under a table, desk, or secure it
in place at the top of your workspace. The mounting bracket
can either be mounted with the provided double sided tape or
mounting screws.
With the cord facing upwards (Match the shape of the Power
Hub with the mounting bracket) simply align the notched
mounting pegs into the holes on the back of the hub. To lock into
place, slide the mounting plate down. To remove the hub from
the mounting bracket once it has already been installed, slide the
hub in the opposite direction and the hub will unlock from the
mounting plate.
Tip: If using the mounting screws, use the mounting plate as a
template to mark and pre-drill the holes required for installation.
pegs
pinzas
goupilles
pegs
pinzas
goupilles
BRACKET / SOPORTE / SUPPORT
screws
tornillos
vis
Publicidad
