Hints On Disposal; Declaration Of Conformity - Waldbeck Cisternica Manual Del Usuario

EN
14
Problem
Pump does not switch off.
Delivery insufficient.
Pump switches off after
short running time.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU
this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information
about recycling of this product, please contact your local
council or your household waste disposal service.

DECLARATION OF CONFORMITY

Producer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin,
Germany.
This product is conform to the following European
Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Possible Cause
Float switch cannot sink.
Inlet sieve blocked.
Pump performance
reduced by heavily
polluted water.
Motor protection
switches the pump off
due to excessive water
contamination.
Water temperature too
high (motor protection
switches off).
Suggesed Solution
Place the pump correctly
on the ground shaft.
Clean the sieve.
Clean pump and replace
wearing parts.
Pull out the mains plug and
clean the pump and shaft.
Make sure that the
maximum water
temperature is 35 °C.