SGB FA6 Manual De Instrucciones página 14

Manual
Dear customer
Thank you for choosing the level indication FA6 for fuel oil.
It allows you to continuously check the
content of a tank.
General notes
Without obtaining prior permission of the manufacturer,
no alterations, attachments or conversions to the
product may be conducted. In respect of alterations
without the prior permission of the manufacturer being
obtained, we cannot accept any liability and the
warranty will lapse. Tank modifications must be carried
out by certified specialists. For a smooth operation,
it is necessary to use original equipment only.
Application
The level indication FA6 is a level gauging device. It can be used
for all forms of tanks, casks or cisterns. It is neither
suitable nor approved for
Note: To use level indication FA6 with liquids other than fuel oil,
please contact the manufacturer/distributor.
Scope of supply: (Page A)
Commissioning
1. Place measuring tube into the tank (Page B).
2. Fix level indication FA6 with the three rear adhesive dots
above maximum filling level. Use optional wall
plugs and screws (Page C).
3. Connect level indication FA6-hose with measuring tube.
Operation
• Press the square to effect measurement.
• The filling level in cm is indicated after a short time.
• Perform a second measurement as a control check.
If different results are indicated, perform further
measurement, until the measuring values are stable.
• When the indicator flashes, change the battery.
13
applications in explosive areas.
UK
level indication FA6 Issue 09/2015