Gima 39800 Manual Del Usuario página 5

5
Detailed Description of Devices
Name: Cuticle Nipper 10cm
Finish: Mirror / Satin / Sandblast.
Instructions of Use: Cuticle Nippers is made of stainless steel type AISI-410 under standard ASTM F-899-84. It is
used for to cut the cuticles, hanged nails and dead skin etc.
Name: Nail File with Colored Handle, 10cm
Finish: Satin & Powder Coating Color.
Instructions of Use: Nail File is made of stainless steel type AISI-410 under standard ASTM F-899-84. It is used for
rubbing and nail shaping purpose.
Name: Nail Nipper, 10cm
Finish: Mirror / Satin / Sandblast.
Instructions of Use: Nail Nipper is made of stainless steel type AISI-410 under standard ASTM F-899-84. It is used
for nail cutting purpose.
Name: Nail Scissors 9.5cm
Finish: Mirror / Satin / Sandblast.
Instructions of Use: Nail scissors are made of stainless steel type AISI-410 under standard ASTM F-899-84. It is used
for nail cutting purpose.
Name: Pusher Double Ended, 12cm
Finish: Mirror & Powder Coating Color.
Instructions of Use: Cuticle Pusher is made of stainless steel type AISI-410 under standard ASTM F-899-84. It is
used for pushing purpose.
Name: Tweezers, 10cm
Finish: Satin & Powder Coating Color.
Instructions of Use: Tweezers is made of stainless steel type AISI-410 under standard ASTM F-899-84. It is used for
plucking and hair removal purpose.
Contents or Composition
ASTM Standard F-899-84
Carbon: 0,126%
Silicon: 0,275% max
Indication of Use
• Put away from the reach of uncontrolled person.
• A trained person shall use the devices.
• For professional use only – disinfect before use.
Precautions, restrictions, warnings, special cares
Methods of Proper Cleaning
Proper cleaning requires liquid soap/detergent, water and the use of a clean and disinfected scrub brush to remove all
visible debris and residue.
All items should be scrubbed with a clean and disinfected scrub brush under running water.
Cleaning is not disinfection; disinfection is an entirely separate step. Different items are cleaned in different ways. This
often depends on the item manufacturing material and how the item has been used.
NOTE: the cleaning step must be properly performed before an item can be disinfected. All items must be thoroughly
rinsed and dried with clean cloth or paper towels prior to putting them into a disinfectant.
Methods of Proper Disinfecting
After proper cleaning, all reusable implements/tools must be disinfected by complete immersion in an appropriate disin-
fecting solution (see below, Appropriate Disinfectants).
The item must be completely immersed so that all surfaces, including handles, are soaked for the time required on the
disinfectant manufacturer's label.
Manganese: 0,514%
Chromium: 13,503%
Phosphorus: 0,021%
Nickel: 0,101%
ENGLISH
Sulphur: 0,015%