Hamilton Beach 40792 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning
1
Make sure unit is turned on and
the green ready light illuminated.
Turn control knob to STEAM
position and let steam flow for
about 30 seconds into a cup;
then turn control knob back to
the STANDBY position.
5
w WARNING
unit or brew head. Do not immerse cord, plug, or base in any liquid.
2
Place a container under brew
head wide enough to catch water
from both spouts. Turn control
knob to BREW
and dispense
at least 1 cup (237 ml) of water.
Carefully wipe exterior and brew
head with warm water and damp
cloth.
Electrical Shock Hazard. Disconnect power before wiping exterior of
3
Turn control knob back to
STANDBY position; then press
ON/OFF button to turn unit OFF
(O). Unplug the unit.
6
4
Allow unit to cool completely;
then remove cover of frothing
nozzle and wipe down nozzle
with a cloth.
Every other use: Remove nozzle
tip with wrench on tamping tool
and wash in warm, soapy water.
Wash all parts with warm, soapy
water. Rinse and dry thoroughly.
No parts are dishwasher-safe.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido