Bluetooth Setup - Steren CAR-850 Manual De Instrucciones

This unit has been designed to use 4 speakers, never use only two
speakers.
Never plug the negative end from the speakers to the ground.
Speakers impedances is from 4 to 8ohm

BLUETOOTH SETUP

Make sure that your mobile includes the Bluetooth function.
Make sure that Bluetooth function is working and ready for audio
devices searching.
1.- Press Phone button in frontal panel or remote control.
2.- Press and hold Selector button 3 seconds, you will see the message
Find Num in the screen, now you are in Setup Mode.
3.- Press Selector button 5 times, now you will see the message
PAIRING in the screen.
4.- Press Answer button, Pairing message and the indicator light will
blinks. Now the car stereo is ready to pair with a mobile.
5.- In your mobile, search for Bluetooth audio devices.
6.-May appears many audio devices, make sure to find VR500CS-BT,
and choose it.
7.- Look the display and you will see the message Connecting, now the
mobile will request you for a password, type four zeros (0000) and press
Enter.
8.- Both devices are paired now and ready to use it. Incoming and
outgoing calls can be controlled from the car stereo.
When you are in Setup mode, you will have 10 seconds to do some
action, otherwise the car stereo will leave this mode and you must
begin again.
Please, refers to mobile's instruction manual for Bluetooth
operation details.
USING THE BLUETOOTH FUNCTION AS HANDS
FREE
1.- Press Phone button to switch to Phone mode.
2.- Press and hold Selector button 3 seconds to enter setup mode.
3.- Now, each time you press Selector button you will have access to
this options:
Find Num
Press to search incoming or outgoing phone numbers
Add Num
This option helps to store phone numbers in memory.
1.- Press Answer to edit.
2.- Name message displays in the screen. Here you can set the name of
the contact.
ENGLISH-13