Steren CAR-850 Manual De Instrucciones página 14

3.- Turn right or left the Selector button to enter a letter of the alphabet.
Press Selector button to move to second letter. Repeat the process until
you write whole contact name, then press Answer button. The message
number will blinks in the screen.
4.- Enter the contact's phone number, use the Selector button to enter
each number, after this, press Answer button to store the changes, in the
screen you will see the message Save.
Melody
Use to select one distinctive ringtone for incoming calls.
Ring
Use this option to select how many rings must be heard before the car
stereo answer a call. You have a range from 0 to 47 rings.
Tel
Use this control to configure the volume level of the incoming calls, we
recommend to set an intermediate level to avoid noise in the speakers.
Pairing
Use this function to pair a mobile with the car stereo
If you have a mobile in use with the car stereo, other options will be
available to set:
1.- Press Phone button to enter Phone mode.
2.- Press and hold Selector button 3 seconds to enter setup mode.
Out Num
Displays the outgoing phone numbers
In Num
Displays incoming phone numbers
Disconn
Select this option to disconnect a mobile
If the system finds an error or there's no mobile connected to the
car stereo, the message No Conn will display in the screen.
ENGLISH-14