Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL
3
Tools needed:
HANDLE SET
(Left Hand)
a
1.
Insert screw bosses on exterior trim plate
(C) through holes on exterior of door. The
spindle on the exterior trim plate should
pass through the lockcase until visible from
interior of door.
3
INSTALL
HANDLE SET
CONTINUED
d
B
1.
Drill two 1/8" holes through the mounting
holes in the lockcase (E), if necessary.
2.
Fasten the lockcase to the door with two (2)
1/2" screws (H) from the blue bag. Tighten
trim plate screws at this time.
6
7
8
9
12
b
X
13
14
VIEW
!
G
C
5/8"
G
1.
Place interior trim plate (D) against interior
5/8"
surface of door. The spindle from the
exterior trim plate inserts into the back of
the thumb turn on the interior trim plate.
Line up small holes in trim plate with holes
on interior of door.
2.
Insert two (2) 7/8" screws (G) from the blue
bag through the interior trim plate holes
1 1/2"
and thread into exterior trim plate screw
bosses. Do not tighten screws at this time.
4
INSTALL
STRIKER PLATE
1 1/2"
i
a
VIEW
!
H
E
F
5/8"
H
1.
Place the striker plate (F) on the latch rail and fasten with two (2) 1/2" flat head screws (I) from the
blue bag in the slotted holes of the striker plate.
5/8"
2.
Adjust the striker plate (F) front to back until the door latches properly, making sure that the
striker plate screws are tightened.
3.
Install two (2) 1/2" flat head screws (I) from the blue bag into the round holes of the striker plate.
Installation Complete.
#8
1/2" SMS Pan
12
13
1/2" SMS Pan Painted
14
1/2" SMS Flathead
1/2" Self-Drill Pan
i
1/2" Self-Drill Pan Painted
VIEW
!
3/4" Machine Flathead
7/8" Machine Pan Painted
D
1" SMS Pan
1" SMS Pan Painted
1" Machine Pan Painted
1-1/2" Machine Flathead
#6
#10
1/2"
3/4" Machine Pan Painted
1-1/2" Machine Flathead
1-1/4" SMS Pan
2" SMS Pan Painted
#8
#12
1/2" SMS Pan
5/8" SMS Pan Painted
1/2" SMS Pan Painted
Tools needed:
1/2" SMS Flathead
1/2" Self-Drill Pan
X
1/2" Self-Drill Pan Painted
VIEW
I
3/4" Machine Flathead
7/8" Machine Pan Painted
1" SMS Pan
1" SMS Pan Painted
1" Machine Pan Painted
I
1-1/2" Machine Flathead
#10
1-1/2" Machine Flathead
3
1 1/2"
1/2" Self-Drill Pan Painted
3/4" Machine Flathead
BLUE BAG / BOLSA AZUL / SAC BLEU
J
7/8" Machine Pan Painted
7/8"
x 2
15
3/4"
1" SMS Pan
1" SMS Pan Painted
c
1" Machine Pan Painted
1-1/2" Machine Flathead
SET SCREW
TORNILLO DE AJUSTE
#10
VIS DE BLOCAGE
1-1/2" Machine Flathead
2" SMS Pan Painted
#12
B
5/8" SMS Pan Painted
D
1.
Place nylon washers (J) from the blue
bag over the interior (B) and exterior (A)
handles. Insert the square spindle of the
exterior handle through the upper hole
in the trim plate, through lockcase (E) and
push until square spindle is visible from
interior of door.
2.
Slide interior handle onto square spindle.
2"
Using the hex wrench (K) from the blue bag,
tighten the set screw on the interior handle
while gently squeezing both handles
together.
BLUE BAG / BOLSA AZUL / SAC BLEU
1/2"
I
!
1/2"
2"
x 2
G
x 2
H
i
VIEW
A
J
E
1/2"
1"
x 4
Publicidad
