Charging The Battery - HAIRCUT TH31 Guía De Usuario

3

Charging the battery

It is essential to charge the clipper battery for about 3 hours before
using the clippers for the first time.
The ideal temperature range for use of the charger is between 5°C and 40°C.
The charging time is about 1.5 hours. The battery reaches its full capacity
after 3 or 4 charging cycles.
3.1 Charging the battery from the mains power supply
Figure 2: Charging the clipper
battery directly from the mains
power supply.
1. Switch the clippers off by pressing the
On/Off button (Figure 1, E).
2. Insert the power pack connector
(Figure 2, B) in the socket (Figure 2, A)
on the clippers.
3. Insert the power pack (Figure 1, N) in
the mains power socket.
4. During the charging cycle, the LCD
unit shows the remaining autonomy
(Figure 1, K). The symbol (Figure 1, L)
is lit up.
5. The charging cycle is switched off
automatically. The symbol (Figure 1,
L) is deleted and the 90-minute
autonomy period (Figure 1, K) is
displayed.
6. Unplug the power pack; the clippers
can be used without the lead.
22