Philips PET724/37 Guia De Inicio Rapido

PET725_QSG20060705.qxd
Philips Portable DVD Player PET725
Quick start guide
Charge
1
1
1 Switch OFF the set. Attach the battery
pack as shown.
2 You can hear clear 'click' sound when it
is successfully attached.
4
3 Connect the supplied adapter to the set
and the AC outlet.
4 RED light turns on.
5 The battery pack will be fully charged in
approximately 5 hours. When the RED
light goes out, it means that the battery
pack is fully charged.
TIP Your battery will continue to charge
while the player is in use. However, the
RED light will not be lit and it will take
approximately 16 hours to fully charge
the battery pack.
2006-07-19 11:44 Page 1
2 Enjoy
5
4
2
1 Open the lid.
2 Switch ON the set.
3 The GREEN light turns on.
4 Open the DVD door using the OPEN
switch on the side.
3
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will
automatically start to playback.
8 Use control keys on the set or remote
control.
3 OPEN HERE
Connect to TV
3
1
6
7
1 Connect the set to TV as shown.
3
2 On the DVD player panel, press AV
IN/OUT repeatedly until you see A/V
OUT on the LCD screen.
3 The TV light will turn on.
4 Please select appropiate input or source
on the TV. You can consult the owner's
manual of your TV. (If your TV does
not have Audio and Video inputs, you
will need to purchase a RF modulator.
Please consult your dealer.)
wk6293
White
Red
Yellow
3
2