Con Guring Your Phone - Yealink CP860 Guia De Inicio Rapido

Hardware Component Instructions
USB Port
PC/Mobile Port
Security Slot
MIC Port
Speaker
LED Indicator
Microphone
Redial Key
Volume Key

Con guring Your Phone

Con guring via web user interface
Accessing the web user interface:
1. Press the OK key when the phone is idle to obtain the IP address of the phone.
2. Open the web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and
press Enter.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Con rm.
Account Settings: Click on Account-> Register
Parameters of the account:
Register Status:
Line Active:
Label:
Display Name:
Register Name:
User Name:
Password:
Server Host:
Register status icons on the LCD screen:
Registered
Note: Check with your system administrator if any error appears during the registration process or if a speci c con guration is
required for your registration.
Con guring via phone user interface
Account Settings:
Press the Menu soft key when the phone is idle, select Settings-> Advanced Settings (default password: admin)-> Account to con gure the
account.
Note: For more information on account parameters, refer to Con guring via web user interface.
18
17
16
13
15
14
13
12
O -hook Key 3
9
Mute Key
10
11
It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
It is shown on the LCD screen to identify the account.
It is shown as Caller ID when placing a call.
It is an authenticated ID for authentication provided by ITSP (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
It is provided by ITSP for registration (required).
Register Failed
12
12
2
Soft Keys
4
On-hook Key
5
Up Navigation Key
6
OK Key
7
Down Navigation Key
8
Keypad
Registering
Internet Port
19
DC5V Port
20
15
13
1
LCD Screen
E
N
G
L
I
S
H
3