Tabla de contenido
Publicidad
APENDICE A: Características Técnicas
Standards
Advanced
Signal Type:
Modulation:
LED Indicators:
Frequency Range
Frequency Band:
Channel:
Data Encryption:
Data Transfer Rate
Receiver Sensitivity
Transmit Power
Transmission Range:
Network Cables
Interface
Antenna:
Chipset
DC inputs
Power Consumption
Temperature
Humidity
Wireless MIMO Multi-Function Access Point
Standard: IEEE 802.11g/b
IEEE 802.3u 10/100BASE-TX Fast Ethernet
•
Wireless Distribution System (Bridge and
Repeat)
•
Advanced Dual-Channel Receiver for
MIMO XR™ Support
•
Range-OVERDRIVE™
provides extended coverage and low
throughput fluctuations
•
Packet-OVERDRIVE™ Technology offers
an
Streaming
OFDM (Orthogonal Frequency Division Multiplexing)
QPSK / BPSK / CCK / OFDM
Power, SYS, WLAN (Link), LAN (Link/Activity)
2412 ~ 2484 MHz ISM band (channels 1 ~ 14)
2.4 GHz
1 ~ 11 Channels (US, Canada, China)
1 ~ 13 Channels (Europe)
1 ~ 14 Channels (Japan)
64 bit / 128 bit WEP Encryption, WPA/WPA2
Fast Ethernet: 100Mbps
Wireless: Up to 54Mbps (with Automatic Scale Back)
54Mbps: Typical -79dBm @10% PER
11Mbps: Typical -90dBm @8% PER
802.11g: Minimum 14dBm typically
802.11b: Minimum 16dBm typically
Outdoor: 100~300M (depends on environment)
Indoor: 50~100M (depends on environment)
10BASET: 2-pair UTP Cat. 3,4,5 (100 m)
1 x 10/100Mbps RJ45 port
3 x 2dBi Dipole Antennas
Ralink™ 2661T
DC 5V /1A
5W (Max)
Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Operating: 10% ~ 90%, Storage: 5% ~ 90%
A02-AP2-W54M
high
throughput
Technology
for
HD
Video
Pag. 52
Publicidad
Tabla de contenido
