allen+roth 1315VA-30-201 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VANITY INSTALLATION INSTRUCTIONS
2. Clean area where the vanity (A) will be
permanently located prior to beginning
installation, ensuring the vanity (A) will not
interfere with any water supply and drain lines
once mounted.
Locate wall studs and mark locations.
Using hardware appropriate for your wall
1227WC
type (not included), secure the Wall Bracket
(H) to the wall into preferably 2 wall studs. Use
hardware such as a cabinet screw or toggle bolt
depending on your wall type. Make sure the
Wall Bracket (H) is level and centered well to the
desired location of the Vanity (A). Be careful
not to disturb any plumbing or electrical lines that
may be concealed in the wall.
!IMPORTANT SAFTEY STEP!
It is critical to have a strong secure
connection to the wall before continuing to
the next step.
1227WC
3. With the help of another adult, carefully
lower the Vanity (A) down onto the Wall
Bracket (H). Be sure the Vanity (A) is secure
to the wall before letting go.
2
1
2
3
4
H
H
A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1083184

Tabla de contenido