English - Mercusys MW300RE Guía De Instalación Rápida

1 Power on
Plug the extender into a power outlet near your router,
and the Signal LED turns solid red.
2 Connect to the extender
Connect your wireless device to the extender's network
MERCUSYS_RE_XXXX.
Note: The default SSID (network name) is printed on the product
label at the back of the extender.
3 Configure
a) Launch a web browser and enter http://mwlogin.net.
Create a password for future login attempts.
b) Select your router's host network and enter the
network password when prompted.
c) Check the Signal LED on your extender. Green or
orange LED indicates a successful connection.
4 Relocate
To achieve better signal quality, plug in the extender
halfway between your router and the Wi-Fi dead zone.
Router
* Image may differ from actual product .
Enjoy!
Connect your device to the extender using the extended SSID. The
default Wi-Fi password is the same as your host network.
Host Network
Extender
Extended Network

English

Clients
1