FAR LEANA CI Manual De Instrucciones página 64

ENGLISH
Front and rear supports
You can place the iron on the front and rear
supports during use, you can also lock the iron
between the front and rear supports to store it
after ironing.
Temperature button
Turn the button to adjust the ironing
temperature for different fabrics.
Heat indicator
When the iron is heating, the heating indicator
lights up. Once the iron has reached the chosen
temperature, the light goes out. The indicator
turns on and off as the iron switches on and
off during ironing to maintain the chosen
temperature.
Steam trigger
Press the steam trigger, steam comes out from
the plate continuously. When you release the
steam trigger, steam stops coming out and you
can dry iron.
Storage bracket
When you are not using the device, the power
cord and supply tube can be stored. First pull
the storage bracket outwards, wrap the cord and
GB-8
the tube around the appliance in the storage slot,
and then push the storage bracket back against
the unit.
BEFORE USING FOR THE FIRST TIME
1. Remove all labels, all protective films and
storage covers from the plate.
2. Heat the iron to the maximum temperature
and iron a piece of damp cloth for several
minutes to remove the residue from the plate
as described in the 'Steam ironing' chapter.
NOTE: It is normal for the appliance to generate a
strange smell when first used. This stops quickly.
NOTE: Some particles may come out of the plate
when the iron is used for the first time. This is
normal. The particles are harmless and no longer
come out of the iron after a short while.
NOTE: When you turn on the steam generator, it
can produce a pumping sound. This is normal. This
sound indicates that the water is being pumped into
the plate.
NOTE: When the plate is heating, some steam may
come out automatically, this phenomenon lasts about
3 seconds and is normal.
ENGLISH
GB-9