Specifi cations:
�
Passive infrared motion detector
�
Continuously on white in motion with 45 extra bright white LEDs
�
Extra white LED life up to 100,000 hours.
�
No Mains Power required
�
Rechargeable batteries is included
�
Waterproof lamp body can be used outdoor
�
AUTO/ON/OFF switch
�
Duration time adjustable and sensor time adjustable to start light
�
Widely used-GREAT FOR GARAGE, WAREHOUSE, ETC
Parts List
Part No.
Description
1
"L" Shape Screw
2
Lamp Body
3
PA3*15 Screw
4
"U" Shape Screw
5
Bracket for solar panel
6
Infl atable capsule
7
Solar Panel
8
PA4*35 Screw
9
Bracket for lamp body
Rotatable lamp head
The lamp head is vertically and horizontal rotatable as shown in below fi gure. But do not rotate head
over the angle.
Location of the Solar Light
1) The solar light must be located in a position where it can get direct sunlight on the solar panel, and
generally free from cover and shade. When locating a suitable position for the unit, remember that it
detects an area of about 45-60 degrees vertically and about 180 degrees horizontally, with a range of
over 5 meters. (As shown in below fi gure)
2) Make sure that the photo sensor on the lamp body is not going to be affected by any other light
source. Otherwise the light will not illuminate at dusk.
3) The Solar light must be left to charge for 2 sunny days before fi rst time use so that best results are
achieved.
Qty.
1
1
1
1
1
7
1
7
1