Designers Edge L-955 Manual Del Usuario página 4

Assembly Instructions
Solar panel installations
(There are two ways to assemble the Solar Panel.)
Pillar Mounted
1) Carefully remove the SOLAR LAMP and all the
fittings out of the box.
2) Setting the "L" Shape Screw (1) to solar panel
(8) with PA3*15 Screw (4). (shown in figure 1)
3) Connect "L" Shape Screw and Bracket for solar
panel (6) and "U" Shape Screw (5). (AS shown in
figure 2)
4) Tumble in the "L" Shape Screw to Pillar and twist
the "U" Shape Screw tightly. (AS shown in figure 3)
Wall or Deck Mounted
1) Choose the wall or deck which you want to
mounted the solar panel. Signed with the 4 holes
for the bracket of the solar panel, burrowed with
Inflatable capsules (7). (as shown in figure 4).
2) Fit the Bracket with the Solar panel with provided
PA3*15 Screw. (As shown in figure 5)
3)Set the Bracket on the wall or deck with 4Pcs
provided PA4*35 Screws (9). (As shown in figure 6)
4) Adjust the angle of Solar Panel to make sure it can
get more light. (As shown in figure 7)