Steren TEL-610 Manual De Instrucciones página 111

5. BASE 1 2 3 4 is displayed and the registered base number is flashing.
6. Enter the number of the base on which you wish to register your handset.
If you have only 1 base station, press 1. If you have 2 base stations, press
1 or 2, etc.
7. When the display shows PIN - - - -, enter the base PIN.
8. When the handset registers with the base, it is assigned a handset
number.
- To select a base
You can register your telephone handset with up to 4 bases. Once registered,
you can switch between bases, for example, bases at home and at work.
1. Press MENU/OK and scroll ▼ to ADVANCED SET and press MENU/OK.
2. Scroll ▼ to REGISTRATION and press MENU/OK.
3. SELECT BASE is displayed. Press MENU/OK.
The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want 1, 2, 3 or 4 and press MENU/OK.
When the base is found you hear a beep. If not found, the display shows
UNREGISTERED.
- To unregister a handset
1. Press MENU/OK and scroll ▼ to ADVANCED SET and press MENU/OK.
2. Scroll ▼ to UNREGISTER and press MENU/OK
3. Enter the 4 digit master PIN and press MENU/OK.
Display shows the registered handset numbers.
4. Scroll ▲ or ▼ to select the handset you want to delete and press MENU/
OK. UNREGISTERED is displayed on the handset screen.
52