To Adjust The Volume; To Mute The Microphone; To End A Call; To Switch Handset On/Off - Steren TEL-610 Manual De Instrucciones

NOTES:
If you have subscribed to your Network's Caller Identity service and assigned
a VIP Group to the caller's number, the caller's details are displayed before
the phone starts ringing.
You can set your phone to give the default ringtone as soon as the call is
received then once the caller's identity is displayed, the assigned ringtone
will start.

4.- To adjust the volume

During a call, press ▲ or ▼ to adjust the earpiece or loudspeaker volume.
The level is shown in the handset display.

5.- To mute the microphone

Mute the microphone so that you can talk to someone else in the room
without your caller hearing you.
1. During a call, press 'mute'. The microphone is muted.
2. Press 'mute' again to turn the microphone back on.

6.- To end a call

Press .

7.- To switch handset on/off

1. Press and hold until the handset switches off.
2. Press and hold again to switch the handset back on.
23