Steren CD-550 Manual De Instrucciones página 10

HOW TO CONNECT AN EXTERNAL AUDIO
SYSTEM
Connect the stereo cable (not included) to LINE OUT jack in the
CD Player. Then connect the stereo cable plugs to the CD/AUX
audio LEFT & RIGHT input jacks on your amplifi er / receiver (Do
not connect to PHONO jack).
Always turn the CD player off before making an external Always turn the CD player off before making an external
connection. If CD player causes any signal interference to connection. If CD player causes any signal interference to
your TV Set or Radio, please keep it away. your TV Set or Radio, please keep it away.
COMPLEMENTARY INFO
Do not use different types of batteries, at the same time.
Do not mix new batteries with old ones.
When the batteries are not to be used for a long time, remove
them.
MAINTENANCE
• Use a soft dry cloth slightly moistened in water or a mild
detergent solution. Do not use alcohol or benzene.
• Your CD player was designed to reproduce Audio CD, CD-R
& CD-RW.
• You cannot play any other kind of CDs.
• Always place CD with printed side up.
• To keep the CD clean, always handle by the edges to avoid
• fi ngerprints or scratches on the playing surface, which can
prevent the laser bean from correctly reading the digital
information, or create a skipping sound.
• When you need to write on the CD surface, always use soft
pens.
• If any CD has fi ngerprints, dust, etc. clean only with a soft,
dry cloth.
• Always keep the CD in its protective case or sleeve when it
is not in use.
• Do not leave the CDs in a location near heat sources, or in a
place subject to direct sunlight, excessive moisture or rain.
ENGLISH-10