Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Final Spin Speed
The High, Medium and Low spin speeds have been developed
for each cycle. The speeds will vary from cycle to cycle. For
example, High Speed in the Normal cycle is much faster than
High Speed in the Handwash cycle.
•
Increasing spin speed will extract more water and decrease
drying time.
•
Decreasing spin speed will reduce wrinkling.
•
HANG DRY is available with some cycles to gently spin items
that should not be machine dried.
•
Use NO SPIN to omit the final spin at the end of the cycle. The
load will be very wet. Remove items from the wash drum to
drip dry or select DRAIN / SPIN to remove excess water at a
more convenient time.
Soil Level
Select HEAVY SOIL to increase the wash time or LIGHT SOIL
to decrease the wash time in some cycles.
Cycle
Heavy Soil
Heavy
+ 5 minutes
Normal
+ 5 minutes
Perm Press
+ 2 minutes
Jeans
Water Level
There is no need to select a water level. The washer automati-
cally adjusts the water level to the type and size of wash load.
Cycle Options
To select or delete an Easy Iron, Extra Rinse, Extra Spin or
Cycle Signal, press OPTIONS until the blinking light indicates the
desired option. Then, while it is blinking, press SELECT. The
indicator will light when the option has been selected. It will no
longer be lighted when the option has been deleted. To
provide the best care for your laundry items, not every option
is available with every cycle.
Easy Iron
Adding the Easy Iron option alters the spin pattern of the cycle
to further reduce wrinkling.
Extra Rinse
Use this option when additional rinsing is desired to remove ex-
cess dirt and detergent. It is recommended for heavily soiled loads
or if household members have sensitive skin. Extra Rinse occurs
before the final rinse when the liquid fabric softner is dispensed.
Light Soil
- 3 minutes
Extra Spin
- 2 minutes
Use this option to add several additional minutes to the final spin at
- 2 minutes
the selected speed. This will improve water extraction and de-
crease drying time.
Cycle Signal
A signal will sound at the end of the cycle when the cycle signal is
selected.
Washer Features
Delay Start
Press Delay Start to select a wash time convenient to your schedule
or during off peak energy hours. The start of the cycle can be
delayed for up to 16 hours.
(Control Lock)
T
o avoid having someone accidentally start or stop the washer,
press OPTIONS and SELECT at the same time until the
(Control Lock) indicator is lighted. To unlock the controls, press
OPTIONS and SELECT again.
Estimated Time
The estimated total cycle time will be displayed when the cycle
is selected. The time may increase if water pressure is low or
the load becomes unbalanced. The approximate time remain-
ing will be displayed during the cycle.
Status Lights
The following will be displayed during the cycle:
•
Door Lock
•
Add Garment
•
Washing
•
Final Spin
•
(Control Lock)
PN 134524000B (0501)
Publicidad
Tabla de contenido
