Adjustments To Your Remote Control - Philips SRP620 Instrucciones De Manejo

SBC_SRP620_v2.qxd 26-04-2005 14:58 Pagina 6
27 Smiley
28 Frownie
29 Text
30 txt mix
31
32 Ext
33 0
P/-/-- Previous program
34 P
1
For installing TV channels on older Philips TVs
and
installation menu on older Philips TVs
simultaneously.
This is only necessary if your TV does not respond at all or if
the TV does not respond correctly to some of the keys on the
SRP620. With a simple procedure you can adapt the SRP620
to your TV.
Teletext buttons are not working properly
Some TVs work with different Teletext commands.
Solution:
Teletext buttons do not work at all
Some Matchline TVs work with different Teletext commands.
Solution:
Picture in Picture (PIP) is not working
Some Philips TVs work with different PIP commands.
Solution:
6
Instructions for use
TV function
Smiley
Frowney
Text on/off
Text hold
1-9
External input 1
0
simultaneously. For leaving the teletext menu or the
ADJUSTMENTS TO YOUR REMOTE CONTROL (TV)
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 8 simultaneously
for 5 seconds till the mode lights blink twice.
- If Teletext still doesn't work, go to the next paragraph.
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 6 simultaneously
for 5 seconds till the mode lights blink twice.
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 2 simultaneously
for 5 seconds till the mode lights blink twice.
Shift TV function DVD/VCR function
Conceal/reveal
Text enlarge
Text cancel
Text mix
+ 1: Radio
+ 2: TV
+ 3: HD
+ 4: PC
External input 2
Double digit
program selection
, press
Short play/
long play, Options
Tuner
Select/VPS
Clear
1-9
1-9
0
, press
and