Bowflex VeloCore Manual De Instrucciones página 2

2. With the Pedal started by several hand turns into the Crank
Arm, fully tighten it with the 15 mm Wrench.
3. Confirm that the Pedal is fully tightened with the 15mm Wrench.
4. Repeat with the other Pedal.
Be sure to check the Pedals weekly to confirm that they are
Note:
fully tightened.
 S incethismachineoperateswithafixedgear,donot
back, or reverse, pedal. Doing so may loosen the
Pedals, which could result in damage to the machine
and/or injury to the user. Never operate this machine
with loose Pedals.
15mm
2