Product Safety Information; Product Specifications - Ingersoll Rand 429G Manual Del Usuario

Product Safety Information

Intended Use:
This Air Reciprocating Saw is designed for cutting plastics, fiberglass, composites,
aluminum and sheet metal.
For additional information refer to Air Reciprocating Saw Product Safety Information
Manual Form 16578809.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Strokes Per
Minute
Model
spm
429G 10000
Tool Weight
Model
lbs
429G 1.4
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16585382 and table on page 2. Maintenance frequency is shown in circular
arrow and defined as h=hours, d=days, and m=months. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
45661188_ed1
Stroke Length
Inch mm
0.39 10
Length without
Blade
Kg inch mm
0.6 9.1 231
Avg. Air Consumption
cfm l/min
8 226
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
P
84.3 95.3
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
EN
Air Consumption
@ Load
cfm l/min
9 255
Vibration Level
(ISO8662)
) m/s
2
W
18.1
EN-1