Mounting - Resol SP10 Instrucciones De Montaje Y Conexión

RESOL SP10
Overvoltage protection device
• Stable and weather-proof housing with
outstanding design
• Overvoltage protection against local lightning strokes
and other externally induced voltages
• Easy to mount
1. Wall mounting
upper part of the housing
34 mm
40 mm
For optimum protection against moisture, the sensor protection
device must be fitted vertically:
lower part of • Unscrew the housing screw and remove the upper part
the housing of the housing
• Mark the fastening points on the wall and drill
(centers 5 cm; 1.97")
• Attach the lower part of the housing to the walls using
the screws
• Put the upper part of the housing onto the lower part
and attach with screw.
EN
64,07 mm
67,79 mm
7
|