Troubleshooting; Specifications - Steren PAR-064 Manual De Instrucciones

5. TROUBLESHOOTING

Trouble
The lamp does
not turns on
When you connect
the lamp to a DMX
controller you cannot
control it

6. SPECIFICATIONS

Input: 85-240V~ 50/60Hz 20W
Operational temperature: -20°C to 45°C
RH: 0% - 90% non-condensed
Consumption: 160 Wh/day (10h x day)
Stand-by power consumption: 14 Wh/day
Product design and specifications are subject to change, without notice.
12
• Check that the connection to the mains is correct.
• If it is going to be used independently, check that it is
not in SLAVE mode.
• If you are in audio rhythmic mode, approach a sound
source and adjust the sensitivity.
• Check that the connection is correct and refer to the
instructions of your DMX controller.
• Adjust the lamp´s address so that it coincides with
the one of the DMX controller.
Solutions